Start with what you want to change
If bottles crowd the basin, measure the wall for a mirror cabinet and check that its door can open past the light and tap. If towels never dry where they hang, try another rail position or a freestanding rail before drilling into tiled walls.
Check the basin before choosing a tap
Count the tap holes and measure from the fixing point to the bowl. A replacement spout should reach comfortably over the basin. Check the tap’s pressure requirements against your water supply and make sure the installer can reach the connections underneath.
Measure what sits behind the vanity
A new vanity can have the same width and still leave a strip of bare wall or floor exposed. Check where the existing tiling ends, how the waste enters the unit and whether drawers will open past the door or toilet. Take a photo inside the old cabinet before shopping.
Check the shower screen against the tray
Measure the finished tiled opening and note the make of the tray or enclosure if you can. Check the replacement screen’s adjustment range, opening direction and fixing positions. Ask the installer how the old holes and new fixings will be sealed.
When is a larger refit worth considering?
Loose tiles, a soft floor or a damp patch in the room below are reasons to have the cause investigated before covering anything up. If the main problem is the door swing, the shower size or the position of the toilet, a layout survey may save you buying fittings that would need to come out again.
For changes to the layout, tiling or services, see what goes into a bathroom refurbishment in Dublin.

